Talk to the team today 01273 301303
Menu

Apollo AlarmSense

apollo_alarmsense/alarmssense_logo.jpg

Apollo AlarmSense allows for Detectors, Call Points and Sounders to be wired on the same Zone cabling.

The Alarmsense® system enables all devices in a given zone to be wired to the same pair of cables thus greatly reducing the cabling and installation requirements and hence costs

Having sounders and sounder beacons installed on the same cabling as detectors and call points allows all systems to be configured for common, zonal or two stage alarm by simply setting one of the panels configuration options

apollo_alarmsense/alarmsensewiringdiag.jpg

Apollo AlarmSense Audio Visual

AlarmSense Sounder Baseapollo_alarmsense/alarmsense-sounder-base_45681-510.jpeg

The AlarmSense Sounder Base can only be used with AlarmSense systems. It is fitted with electronic circuitry to monitor the presence of detectors and signals any unauthorised removal of detector heads. It is supplied with a high or low volume setting and red or white caps are available for stand-alone installation.

  • AlarmSense priority/non priority signal recognition
  • Detects the removal of a detector head and reports a fault
  • Continues to work during unauthorised removal of detectors
  • Quick and simple installation
  • Provides audible signal and detection at one point
  • High and low volume ranges

 

AlarmSense Sounder Visual Indicators Baseapollo_alarmsense/alarmsense-sounder-beacon-base_lit_45681-509-hr.jpeg

The AlarmSense Sounder Visual Indicator Base is designed to be used with AlarmSense systems only. It is supplied with a low or high volume setting and red or white caps are available for stand-alone installation.

  • Sounder range between 70dB(A) and 87dB(A)
  • Detects the removal of a detector head and reports a fault
  • Continues to work during unauthorised removal of detectors
  • Quick and simple installation

Back to top

Apollo AlarmSense Call Point

Apollo AlarmSense Manual Call Pointapollo_alarmsense/alarmsense_call_point.png

Apollo's AlarmSense Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. When activated, the manual call point interrupts the polling cycle for a fast response. A combined LED indicator and front reset mechanism allows for a quick and simple reset.

  • EN54-11 Approved
  • A unique, ergonomically designed key for resetting and front cover removal
  • Backward compatibility and retro-fit

Back to top

Apollo AlarmSense Heat

AlarmSense Heat Detectorsapollo_conventional_/series-65-a1r-heat-detector-55000-122.jpeg

There are two heat detectors in the AlarmSense range designed to suit a wide variety of operating conditions. A static heat detector (CS) which responds only when a fixed temperature has been reached and a rate-of-rise detector (A1R) which has a fixed upper limit, but in addition, measures the rate of increase in temperature.

  • Can be used for applications where smoke detectors are unsuitable
  • Ideal environments that are dirty or smoky under normal conditions
  • CS detectors are ideal for use in environments with rapid temperature fluctuations such as boiler rooms
  • 360°C visibility of LEDs
  • Reduction of false alarms
  • Quick and simple installation

Back to top

Apollo AlarmSense Optical

AlarmSense Optical Smoke Detectorapollo_conventional_/series-65-optical-smoke-detector-55000-317.jpeg

The AlarmSense Optical Smoke Detector works using the light scatter principle. The detector changes to alarm state at a pre-set threshold of smoke penetration into the sensing chamber.

  • Responds well to slow-burning, smouldering fires
  • Well suited for bedrooms and escape routes
  • 360°C visibility of LEDs
  • Reduces false alarms
  • Quick and simple installation

Back to top